How To Install Camera Guard On Mavik Pro

The DJI Assistant 2 software contains extra settings and utilities for all DJI equipment such equally drones, gimbals and cameras.

With the DJI Banana 2 Mavic, you have options to upload  flying data, blackness box data, calibrate your vision sensors and upgrade your firmware.

At that place is also a DJI Assistant 2 Simulator for testing flying parameters and practice flight your Mavic drone.

The DJI Banana 2 download and install simply takes a few minutes and is available for Windows and Mac computers.

This post contains all the essential information and more on the DJI Banana two app for the Mavic quadcopter. Now, if you have a Phantom 4 or DJI Spark, the DJI Assistant 2 is the same version. Therefore the below Assistant two settings and utilities will exist very similar.

Now, the DJI Assistant software is for all DJI equipment.  Their equipment all accept a micro USB port. Then, with the DJI Assistant software installed on your figurer, you connect your DJI device to your figurer.

The DJI Banana software will recognize the device whether it is the latest drones such every bit the Mavic Air two, Mavic Mini, Mavic 2, Mavic Pro, Spark, Phantom, M600, a DJI Goggle or Osmo, Zenmuse cameras. The DJI Assistant 2 software will even recognize Lightbridge flight  controllers etc.

For most DJI equipment, the DJI Assistant will just let y'all to update the firmware.  Information technology is different for their quadcopters.

Now, with older versions of the DJI Assistant 2, it was very like shooting fish in a barrel to modify your Mavic Pro quadcopter to make changes to flight parameters and other features.  We will look at these extra settings and how you can still modify your Mavic Pro using DJI Assistant software.

About The DJI Assistant ii Mavic

The latest version of the DJI Assistant 2 Mavic software contains the below components, which we will look at in turn.

• Firmware Updates
• Data Upload
• Blackness Box
• Calibration
• Simulator
• WiFi Settings
• Restore Factory Defaults
• DJI Privacy Policy and Terms of Use of the DJI Assistant 2 app

The DJI Assistant two software is not a cellphone app. It is installed on computers and at that place are Windows and Mac versions. The DJI Assistant software is almost totally different than the DJI Get 4 app.  The only similarities is that you can update the firmware using the DJI Assistant or the DJI Go 4 app.

DJI Assistant 2 – Software To Troubleshoot and Fix

If you wait at the above components and utilities, y'all can see that the DJI Assistant is very much aimed towards helping to fill-in, identify, troubleshoot and fix issues with the Mavic Pro.

Information such as Data Upload and Black Box can be made available to DJI to place issues where they tin examine the flight history and component data to see how to fix the drone.  The data can likewise be used to brand improvements through firmware updates.

DJI drones are actually like flying computers with superlative cameras. When troubleshooting a reckoner and likewise with the Mavic Pro, doing a firmware update or restoring to the factory default will gear up many issues.

Updating firmware wouldn't be the first stride in troubleshooting a problem just some issues such as the Mavic Pro disconnecting from the Remote Control or DJI Go iv app tin be fixed by an upgrade.

Calibration is also a vital step in trying to gear up flight problems.  The DJI Banana 2 contains the vision sensor calibration utility which you are read more on below.

DJI Assistant two Download For Mavic Mini

Click on this link for the DJI Assistant 2 for Mavic Mini here. The version for the Mavic Mini is V2.0.10 for both MAC and Windows computers.

The Banana 2 for MAC computers is a .pkg file and is 379 MB in size.

For Windows laptops, you have a pick to download a nothing or executable file.  The .exe file is 199 MB.

DJI Assistant 2 Download For Mavic Pro

Download the latest DJI Assistant 2 software hither to your PC or MAC for the Mavic Pro.  The latest Assistant 2 version at the fourth dimension of writing is 2 v1.2.4. The DJI Banana software for Mac and Windows computers is unlike so make certain yous download the right software.

The Assistant two download is approximately 217 MB for PC and has a .exe file extension. The MAC Assistant 2 version is approximately 229 MB is size and has a .pkg file extension.

The Mavic Assistant 2 download file will be called something similar "DJI+Assistant+ii+1.2.3.exe" with the file name containing the software version.

DJI Assistant 2 Download For Mavic 2 Pro And Zoom

Download the latest Mavic ii Pro DJI Assistant two software here to your PC or MAC for the Mavic ii Pro and Zoom.  The latest Assistant 2 version for the Mavic 2 Pro And Zoom at the fourth dimension of writing is v2.0.6. The DJI Banana software for Mac and Windows computers is different so brand sure you download the correct software.

The Mavic 2 Assistant 2 download is approximately 187 MB for PC and has a .exe file extension. The MAC Assistant 2 version for Mavic Pro two and Zoom is approximately 345 MB is size and has a .pkg file extension.

How To Install The DJI Assistant ii Software Download

• Download the DJI Banana app from the above link
• Double click on the DJI Assistant executable file which you accept only downloaded
• Click Yes if you receive a bulletin asking something about exercise y'all want the app to brand changes to your computer
• Accept the DJI Assistant 2 App license agreement and click Next
• Click Side by side at the Create a desktop shortcut
• Click Install
• Next y'all will see the software extracting files, then installing
• Click Stop

Best Practice Working With DJI Assistant two Mavic

• Remove the propellers and gimbal guard
• Connect your Mavic Pro quadcopter to your estimator or MAC using the micro USB cable
• Open the DJI Assistant two Software
• Double click on Mavic Pro icon
• Log into your DJI Account so yous need to exist continued to the internet

DJI Assistant two Mavic Guide

Below we look at each component of the DJI Assistant and how information technology can assist yous in agreement and helping fix your Mavic quadcopter.

DJI Banana ii Firmware Update

In this area of the DJI Banana 2 Mavic software, you tin see your present firmware version and whether there is a new firmware update available. Y'all tin can also read the release notes if in that location is a new firmware bachelor.

You lot may too see an older Mavic firmware version.  You may need to downgrade to an older version if yous installed the latest firmware and it contained a bug which acquired problems with your Mavic Pro quadcopter or remote controller.  You lot would then downgrade your Mavic Pro firmware.

Updating the firmware will fix quite a few issues and add new features to the Mavic Pro.

Update Mavic Pro Firmware Using DJI Assistant two

Here is the instructions on how to use the DJI Assistant ii to update the firmware for the Mavic Pro quadcopter and remote controller. Both tin be washed at the aforementioned time.

1. With the remote controller and the Mavic powered off, connect the RC to your estimator through the charging port using a micro USB cable
2. Power on the Mavic Pro RC and Mavic Pro quadcopter and make sure both are continued
3. Open the DJI Assistant 2 software and login to your DJI business relationship
4. Select the "Mavic Pro" icon and click on the "Firmware Updates" on the left panel
5. Select the firmware version that you wish to update
6. Wait for the firmware to be downloaded and the firmware update process volition start automatically
7. Reboot the Mavic Pro quadcopter and the remote controller after the firmware update is complete

Y'all can detect more than information on how to update the Mavic Pro firmware here.  There is tips and instructions along with videos on how to update the Mavic Pro using both DJI Get 4 app and besides the DJI Assistant.

You can also find instructions for updating your Mavic Mini firmware hither and updating your Mavic 2 here.

DJI Assistant 2 Data Upload

The Data Upload section allows you to upload information from the Mavic Pro to your local reckoner.  You can upload aeriform videos, photos and flight log data.  Y'all can choose where you desire to salvage the file to. The file been saved will have a .DAT file extension.

The file name volition wait like to "DJI_ASSISTANT_EXPORT_FILE_2019-10-19_14-15-30.DAT". My last upload was over ane.06 GB in size as I uploaded all files.  Then this can take quite a few minutes to upload.

When yous kickoff open the Mavic Pro Information Upload option, it states in the text pop up box that you will be uploading to the DJI Server.  Nonetheless, I actually only uploaded the data to my laptop.   Now, you lot need to click on confirm before yous can upload to your computer. Please read the information in the popular upwardly box before confirming.

Here is the full instructions on using the DJI Assistant data upload.

• Click on 'Data Upload' from the left mitt side
• Read the information and click on 'Confirm'
• The Data Upload utility reads and lists the files, which volition be uploaded by the Mavic Pro Banana software
• All files are unselected. Y'all tin can select all or cull which files you want to upload
• Click on 'Prophylactic To Local' –  This allows yous to salve the Mavic Pro information onto your local calculator. Now, if this fails, so just out out of the Data Upload and dorsum in and it should work the second time
• Every bit information technology is uploading the files to your local estimator is is besides compressing the files
• Click on Complete at the end. All the individual files are now saved as one compressed DAT file

So we basically have made a backup of the Mavic Pro quadcopter to our local computer.

DJI Assistant 2 Flying Information

This brings you lot into an area where yous can view the Flight Information records.  This department is for checking and analyzing flight information on the Mavic Pro performance and also for diagnosis.  The data is stored in the SD card in the Resources Manager.

When you starting time open up the Flight Data, a dialog box volition appear with the following message;

"Enter the Flight Record Folio. Click the SD Card icon to view flight records. Some functions peradventure temporarily unavailable. Restart Shipping to restore"

Press Ostend.

Click on Open Data Viewer and browse to the data on your SD Card.

At present, if you cannot locate the flight records on your SD menu, you tin can find the flight records on you lot cellphone. This is because the records are also stored by the DJI Go 4 app on your phone.

To observe the Flying Records on your Smartphone, do the following;

Connect your cellphone to your computer.  If yous have an Android telephone, then the cellphone shows upwardly every bit a bulldoze on your computer.  It is very like for iPhone'due south also. Adjacent, navigate through the folders and find the flight record information in the DJI → dji.become.v4 → FlightRecord → MCDatFlightRecords folder.

The DJI Assistant ii Mavic Flights Records accept a .DAT file extension such equally 17-08-05-eleven-10-11_FLY044.DAT.

Some of the information, which you can view is every bit follows;

• Longitude
• Latitude
• Airpressure distance
• Acc Ten, Y, Z  (Accelerometer)
• Gyro X, Y, Z (Gyroscope)
• Velocity North, East, Down, Valid
• Compass X, Y, Z
• Satellite numbers
• Pitch, scroll, yaw
• Distance To home north, due east, home
• GPS level
• Flying status
• RC input pitch, scroll, yaw
• RC status
• RC input throttle
• Motor status of ESC, battery and avoidance
• Usonic summit and valid flag
• Vision height

To learn more than most the above drone components, read and watch videos on IMU, Gyroscope and Accelerometer engineering science in drones.

DJI Banana two Black Box

This is where you can consign the Mavic Pro black box flight log to your local PC.  It is not only the quadcopter black box data. You can also upload the Remoter Controller blackness box data.  This data would be vital if your Mavic Pro was flight weird or fifty-fifty crashed. The DJI Repair Center would analyse the blackness box information which contains flight command information.

• Click on Black Box
• Click on Save To Local
• Choose a location on your local PC or MAC
• Name your file and select information technology
• At present y'all volition see the DJI Assistant ii software exporting the Mavic Pro Blackness Box information
• At the end it will show Export Complete

You can navigate to where you have saved the Black Box data and you will find log files. Yet these are unreadable without special software.  You can upload these to the DJI Server for them to employ to troubleshoot issues or bugs on the Mavic Pro.

DJI Assistant – How To Export Mavic Remote Control Blackness Box Data

If you lot were having some weird issues with your Mavic Remote Controller, then DJI may inquire you lot to upload the raw log information from the RC.  The below video will show you how to apply the DJI Assistant 2 to download and export the Mavic RC data.

DJI Assistant 2 Scale

This is the area where yous calibrate the vision sensors on your Mavic Pro.  Knowing how to calibrate the Mavic Pro vision sensor is very important.  If your receive a vision system error on your Mavic Pro, then calibration may ready the problem. As well, if yous are flight your Mavic Pro and the vision arrangement error occurs, y'all need to fly the quadcopter back to yous directly abroad.

Below nosotros take instructions on the Mavic Pro vision sensor calibration process.  You tin also find more data on calibrating the vision sensors hither along with notes and videos. In that location is also terrific information on the Mavic Pro Vision Positioning organisation.

Calibrate Mavic Pro Vision Sensor Using DJI Assistant ii

1. Open the DJI Banana 2 software on your computer or laptop
2. Make sure your laptop and Mavic Pro batteries have a minimum of 50% charge just improve if fully charged
3. Carefully remove the propellers from your Mavic Pro
4. Connect the Mavic Pro to your laptop figurer using the USB cablevision
5. Switch on the Mavic quadcopter and open the DJI Assistant 2 software
6. The DJI Assistant 2 software will recognize that the Mavic Pro is  connected
7. Select your Mavic Pro drone and click on "Scale" on the left hand side
8. The next window shows y'all the steps involved with calibrating the Mavic VPS
9. Watch the steps involved in calibrating the Mavic visions sensors
10. Click on the "Start Calibration" on the bottom correct manus side
11. Signal the frontwards facing Mavic Pro vision sensors towards the screen
12. The green and red squares take to friction match so you may have to move the Mavic Pro forward towards the screen and back to you to go them to friction match
13. One time the Mavic is in the correct position, the corners of the square will plough bluish
14. Y'all calibrate the vision sensors past moving the Mavic and then as to line up the corners of the blue square to coincide with the blueish boxes
15. Tilt and rotate the Mavic Pro following the blue foursquare on screen
16. One time this Phase ane is complete, you will be prompted to motility the shipping abroad from the screen
17. Next, you lot volition have to follow the footling squares around the screen again
18. This will complete the Mavic Pro forwards facing vision sensors
19. The adjacent steps is to calibrate the Mavic Pro downwardly facing vision sensors
20. Point the under side of the Mavic Pro at the screen with the front of the Mavic pointing upwardly
21. Again, you need to have 4 bluish corners so you lot may need to motility the Mavic closer or further back from the screen
22. Calibrate the bottom Mavic Pro vision sensors by matching the blue corners with the blue box post-obit information technology effectually the screen
23. Again, during this procedure you lot will exist prompted to move the Mavic Pro away from the screen
24. Next, follow the blue foursquare around the screen which is the last stage
25. One time completion of the Mavic vision sensor scale, the DJI Banana 2 software volition automatically calculate, apply and save the VPS calibration settings
26. When calibration is successful, it will show 100% and a bulletin "Calibration Consummate"

DJI Assistant 2 Mavic Simulator

This is a virtual 3D environment from flying data which is transmitted to your PC.  This Assistant two is in fact chosen Simulator Lite.

Before opening the Simulator Calorie-free application, there are a couple of notes.

1. Remove the propellers (extremely important).
2. Bank check and reset the settings in the DJI Go / Vision App.
3. No-Fly-Zone limit is not constructive in the Simulator lite.

Click on Simulator.  The Simulator Settings will open up and cull the following;

• Latitude
• Longitude
• Air current Speed

Click on Starting time Simulating.

Next switch on your Mavic Pro Remote control and you can fly the Mavic Pro in the Simulator.  The Mavic will fly and behave according to the breadth, longitude and wind speed which yous programmed in.

DJI Banana ii WiFi Settings

When yous click on the WiFi Settings in the DJI Banana 2, you lot volition be brought to the settings folio.

The DJI Assistant 2 software will pull the WiFi SSID and Password from your Mavic Pro as you can see in the below epitome.  I have removed some characters from my password in the below image.

At present, for the DJI Assistant 2 to recognize your Mavic WiFi SSID and password, y'all first need to configure and add the Mavic WiFi in your laptop network settings.

You computers WiFi will detect the Mavic WiFi so you lot should only need to put in your password.  To find the SSID and password on your Mavic, check on one of the front arms.  You lot tin besides find the SSID and password past removing the battery from your Mavic.

There is naught else to configure in the DJI Assistant 2 WiFi Setting. If you take questions regarding your Mavic, then you lot can observe most Mavic FAQ answered hither.

DJI Banana 2 Release Notes

So the DJI Assistant software is non for 1 specific DJI hardware.  When you connect your DJI equipment to your computer and start up the DJI Assistant 2 application, it will recognize the device.  So to update the DJI Goggles for example, you would connect your goggles to your laptop via the mini-USB port. Information technology is the aforementioned for DJI drones, gimbals, propulsion systems and flight controllers..

Now if you look at the latest release notes on the DJI Assistant ii, you can run across all the fixes and new features for DJI'due south total range of products. I have mentioned simply a few below and you can detect more on the DJI Banana 2 download page.

• M600 / M600 Pro – Optimized DJI Device D-RTK page
• M600 / M600 Pro – Added Playback and Tape mapping options to the Tools > Function Aqueduct page
• M100 – Added support for uploading flight data
• Ronin two – Added back up for configuring gimbal motors
• Spark – Added the black box information transmission feature
• A3  / N3 – Fixed bugs in Bones Settings > Remote Controller
• Added an E5000 ESC setting in DJI device
• P4A – Added vision system calibration
• DJI Goggles – Added support for uploading information
• A3 / N3 – Added an option which allows the motors to start i by 1
• A3 / N3 – Added a control operation slider
• A3 / N3 – Fixed an issue where altitude and distance limit switches displayed inconsistently
• General – Added update function in Polygon No-fly Zone database for Phantom four, Phantom 4 Pro, Mavic Pro and Inspire 2
• M600 / M600 Pro – Added back up for Tools > Shutter settings

So reading the release notes is extremely interesting.  You definitely can encounter how each firmware release fixes outcome, makes improvements and adds new features to the device.

Note: If you require parts, upgrades or accessories for your DJI Mavic, then check out our below pages;

• Mavic Mini
• Mavic Air
• Mavic 2 and Zoom
• Mavic Pro

Modifying Mavic Pro With DJI Banana two

Now with the latest version v1.i.6 of the DJI Assistant, you are not able to see the actress setting to modify the Mavic flight settings and parameters.  With DJI Assistant 2 version v1.1.2, you could brand quite a few changes such every bit the beneath and many more.

• Height Limit Removal
• NFZ Removal
• Wind Warning Removal
• Faster RTF (Return To Home) Way

If you have installed the v1.1.6 of the DJI Assistant ii, well you lot can't have v1.1.2 installed at the aforementioned time. For example, in that location is no choice to install the DJI Assistant to a different location in your difficult drive.

Then you lot accept to uninstall the newer version and install the older v1.1.2 version. Or, if yous accept a second estimator you could install v1.1.2 on it, then adhere your Mavic.

With v1.one.2, you still need to make a small configuration change in the principal.js in the DJI Production → DJI Banana 2 → App Files folder. The instructions are in the below video.

Yous can find and download the older DJI Banana version v1.i.2 here.  Expect below the video and  y'all will see the links. The .exe file will exist for Windows computers and the .pkg will be to install the DJI Assistant on Macs.

In the below DJI Assistant ii video, information technology shows you how to configure the Assistant 2 software to requite yous the actress developer tool settings and too how to modify your Mavic Pro.

Notation: Delight be careful making modification to your Mavic Pro.  If you are unsure on what yous are changing, and then do your research, post a question on the DJI forum or even write an email to DJI Back up.  You definitely don't want to brand a change that would brand your Mavic Pro crash.  No ane wants that.

If yous are into programming, and so if y'all want to make changes to the Mavic pro or create new applications then y'all should sign up and use the DJI SDK developer tools.

Okay. Lookout man the beneath video and follow the instructions to change your Mavic Pro.

Source: https://www.dronezon.com/diy-drone-repair-videos/dji-innovation-drones/dji-assistant-2-mavic-software-app-download-guide-mods/

Posted by: martincongs1974.blogspot.com

Share this post